|
Copper Slag
|
|
Product Description and Technical Data:
JetBlast™ Copper Slag is a by-product in the manufacture of co - pper. During the smelting and quenching process, in the copper smel - ter, mineral slag is converted to Iron Silicate, thus producing raw copp - er slag. The raw copper slag is then processed at up to 90 tonnes per hour, to produce JetBlast™. JetBlast™ is produced from 100% raw cop - per slag and is not mixed with recycled copper slag or tin slag. Additi - ons of either of these two products can significantly increase levels of Radioactivity and Conductivity.
|
 |
|
|
JetBlast™ is a low cost expendable material suited for open bla - st cleaning and due to its low silica content does not pose the health hazards created by silica sand. Its sharp, hard cutting edges provide a fast cleaning action and excellent surface profile preparation. JetBlast™ is one of the most economical expendable abrasives available for cleaning steel surfaces where recovery and reuse are not practical.
Coarse grade JetBlast™ is used predominantly in shipyards for the removal of heavy corrosion and coatings leaving a typical surface profile of up to 120 microns. Medium grade JetBlast™ is used for cleaning mill scale and medium rust removal, creating a typical surface profile of 60 to 100 microns. Fine grade JetBlast™ is used on new steel to remove mill scale and light rust resulting in a typical surface profile of 40 microns. For low-end applications, where blasting cost is a major factor, a general grade material is available.
|
| |
| JetBlast™ Abrasive Properties: |
|
Shape |
Sharp, Angular |
Hardness
(Moh Scale) |
6-7 |
Bulk Density
(kg/m³) |
1900 |
|
Particle S.G. |
3.4 |
|
Colour |
Shiny Black |
|
Size Standard |
ASTM |
|
Conductivity |
< 25 ms/m |
|
| Fe 2 O 3 % |
> 45 |
Tin % |
0.08 |
| SiO 2 % |
> 31 |
Antimony % |
0.07 |
| AI 2 O 3 % |
> 4 |
Chromium % |
0.02 |
| Zn % |
< 1 |
Cobalt % |
0.02 |
| CaO % |
< 7 |
Nickel % |
0.02 |
| Cu % |
< 1 |
Cadmium % |
0.004 |
| MgO % |
> 1.5 |
Arsenic |
Not Detected |
| TiO 2 % |
< 2 |
Beryllium |
Not Detected |
| Free Silica % |
< 1 |
Trace Elements % |
< 0.5 |
| Lead % |
0.1 |
Moisture % |
< 1 |
|
|
| |
| JetBlast™ Available Sizes: |
|
Grade |
30/60 |
16/30 |
12/30 |
10/30 |
8/30 |
G.Grade |
|
Microns |
250-600 |
250-1180 |
600-1700 |
600-2000 |
600-2360 |
0-5000 |
|
Inch (.001") |
0.009-0.023 |
0.009-0.046 |
0.023-0.06 |
0.023-0.078 |
0.023-0.092 |
0-0.195 |
|
| |
| JetBlast™ Packaging: |
| 50kg Bags |
2 tonnes Pallet (40 Bags) |
| 2.0 Tonnes Bulk Bag |
1.5 Tonnes Pallet (30 Bags) |
| Bulk Hoppers, Feeders and Tankers |
1.0 Tonne Pallet (20 Bags) |
|
| |
| JetBlast™ Ordering Information: |
| Stock Code |
ACS - XXXX - YY - ZZ |
| Key |
XXXX - Product grade (e.g. 8/30, XXXX=0830)
XXXX - R0000 or R0001 when product recycled
YY - Product weight (e.g. 2T, YY=20)
YY - 00 when packing bulk or loose bags
ZZ - Packing
AO for BULK
BA for LOOSE BAGS
CP for BULK BAG
CX for JUNGLE BOX
DA for SHRINK WRAP |
|
| |
Note - Figures may vary depending on raw materials and manufacturing processes used.Contact Pan Abrasives for further information. |
| |
BLAST
POTS
