Untitled Document
Untitled Document
Untitled Document
BLAST POTS
(브라스트 포트)
BLAST CABINETS &
CLOSED CIRCUIT BLASTERS
(브라스트 캐비넷)
ABRASIVE RECOVERY &
RECYCLING SYSTEMS
(연마재 회수 장치)
ABRASIVES
(연마재)
BLAST WHEEL
REPLACEMENT PARTS
(브라스트 휠)
AIR BLAST ACCESSORIES &
REPLACEMENT PARTS
(브라스트 악세서리)
NEW PRODUCTS
신제품
 
HOME > 브라스팅 장비

Cutwire

목록보기

WireBlast™ is a popular alternative to cast steel abrasives, and finds specific niche markets where cast materials do not offer adequate performance. This is particularly true for peening applications where a higher level of abrasive hardness is desirable or when components to be peened have a high level of inherent hardness.
In order to produce repeatable peening results, the ideal peening media should contain particles of identical size, shape, hardness and density. WireBlast™ is manufactured from wire strand, cut to lengths equal to its diameter. This results in particles virtually identical in size, shape, hardness and density and thus a media ideally suited for peening purposes.
WireBlast™ Carbon Steel and WireBlast™ Stainless Steel are supplied in 3 forms depending on the requirements of the application. 1. As Cut (cylindrical with sharp edges), 2. Partially Conditioned (corners rounded off) and 3. Fully Conditioned (spherical). During use WireBlast™ Stainless Steel will work harden the more it is used, leading to an extremely long abrasive life span.
The close size range of the WireBlast™ particles ensures consistant re sults are achieved when used for surface finishing and treatment of metallic materials.
WireBlast™ Carbon Steel is very versatile and durable when compared to cast steel abrasives, due to virtually no internal flaws, ie porosity, shrinkage, cracks etc.
Its higher density also offers a higher blast impact when compared with cast steel abrasives.
WireBlast™ Stainless Steel finds applications in cleaning, polishing stainless steel rods, pipes, plates and nonferrous die-cast castings (such as aluminium and magnesium). It is also used for cleaning magnetic parts when ferrous residues cannot be tolerated.
WireBlast™ Aluminum and Zinc are predominantly used for sand, stain and burr removal and to produce a glossy finish on components. It also used in wheel blast applications where a ‘soft impact’ is desired during the blasting process.
Industry users include: Aerospace/Aviation, Automotive, Consumer Goods Manufacturing, Foundry/Die Casting and OEM Subcontractors.
Typical applications include: Shot peening ferrous and non ferrous components; deburring and polishing non ferrous components and surface finishing critical surfaces.
 
Abrasive Properties
 
Carbon
Steel
Stainless Steel
SUS 304
Stainless Steel
SUS 430
Aluminum
1070
Aluminum
5056
Zinc
Hardness (HV)
400 - 500
400 - 600
300 - 450
40 - 60
95 - 125
35 - 55
Density (g/cc)
7.6
7.6
7.6
2.7
2.7
7.1
Bulk Density(kg/l)
4.4
4.4
4.4
1.5
1.5
4.1
Ferrous/Non ferrous
F
F
F
NF
NF
NF
C%
0.4-0.7
<0.08
<0.12
/
/
/
Si%
0.15-0.35
<1
<0.75
<0.2
<0.3
/
Mn%
0.6-0.9
<2
<1
<0.03
0.05-0.2
/
P%
<0.04
<0.045
<0.04
/
/
/
S%
<0.04
<0.03
<0.03
/
/
/
Ni%
/
8-10.5
N/A
/
/
/
Cr%
/
18-20
16-18
/
0.05-0.2
/
Cu%
/
/
/
<0.04
<0.1
/
Fe%
/
/
/
<0.25
<0.4
<.005
Mg%
/
/
/
/
4.5-5.6
/
Zn%
/
/
/
<0.04
<0.1
>99.99
Pb%
/
/
/
/
/
<.007
Cd%
/
/
/
/
/
<.004
 
Available Sizes
Grade
0.2
0.3
0.4
0.5
0.6
0.7
0.8
1.0
1.2
1.5
1.7
2.0
2.3
2.5
Microns
200
300
400
500
600
700
800
1000
1200
1500
1700
2000
2300
2500
Inch (.001”)
0.007
0.011
0.015
0.019
0.023
0.027
0.031
0.039
0.047
0.059
0.066
0.078
0.090
0.098
Al1070
Steel
 
SUS304
 
SUS430
Zn
Other sizes and MIL Spec available upon request
 
Packaging
25kg Woven Bags 1 Tonne Crates
 
ORDERING INFORMATION
Stock Code
AOT?CWXXXX-YYZZ
Key
XXXX - Product material
AL1070 for Aluminium 1070
C62B, C72A or C82B for Carbon Steel
SS304 for Stainless Steel 304
SS430 for Stainless Steel 430
ZN for Zinc
YY - Product size (e.g. 0.6mm, YY = 06)
ZZ - Conditioned form
G1 for As Cut
G2 for Semi Rounded & Conditioned
G3 for Fully Rounded & Conditioned
 
 
Untitled Document