Untitled Document
Untitled Document
Untitled Document
BLAST POTS
(브라스트 포트)
BLAST CABINETS &
CLOSED CIRCUIT BLASTERS
(브라스트 캐비넷)
ABRASIVE RECOVERY &
RECYCLING SYSTEMS
(연마재 회수 장치)
ABRASIVES
(연마재)
BLAST WHEEL
REPLACEMENT PARTS
(브라스트 휠)
AIR BLAST ACCESSORIES &
REPLACEMENT PARTS
(브라스트 악세서리)
NEW PRODUCTS
신제품
 
HOME > 브라스팅 장비

Plastic Media

목록보기

LiteBlast™ Plastic Media is a manufactured abrasive utilised in applications requiring a controlled, gentle, non-abrading action, where damage or etching to the underlying substrate cannot be tolerated. The low hardness and specific gravity of LiteBlast™ Plastic Media permit it to be used in the most sensitive of applications. Available manufactured from 6 types of plastic stock, each one with its own differing characteristics, the most suitable LiteBlast™ Plastic Media can be selected for any given application.
LiteBlast™ Plastic Media is suitable for use in both wet and dry compressed air blasting equipment and may be used effectively at extremely low blasting pressures, to ensure no damage to the component being blasted. When used in dry compressed air blasting equipment LiteBlast™ Plastic Media is pre treated with an anti-static agent to prevent adhesion to the component and thus abrasive wastage.
The high durability and irregular particle shape of LiteBlast™ ensures maximum productivity and abrasive life is achieved when utilised in equipment incorporating recycling and re-classification components.
LiteBlast™ Plastic Media is commonly used in applications where the traditional method of component cleaning is to utilise solvents and chemicals.
With the inherent health risks, waste water trea™ent costs, and environmental concerns associated with chemicals and solvents, LiteBlast™ Plastic Media offers a safe, economical and environmentally friendly alternative. No free silica is present in LiteBlast™. The use of chemicals is also non discriminatory, due to the product being immersed. This can lead to damage or stock removal from
the base material. Utilising LiteBlast™ this problem is eliminated as the abrasive is only directed at the waste product that is required to be removed.
Industry users include: Aerospace/Aviation, Automotive, Consumer Goods Manufacturing, Foundry/Die Casting, OEM Subcontractors and Semiconductor Manufacturing.
Typical applications include: Flash removal from discreet computer components, Paint removal from soft or easily damaged substrates such as aluminium, composites, fiberglass, wood etc and for the removal of residues from moulds without affecting the underlying surface.
 
Usage Guidelines and Performance
Use a LiteBlast™ Plastic Media most appropriate for the substrate hardness.
The following parameters govern effectiveness of using LiteBlast™ Plastic Media. Ensure all are correctly established and adhered to for optimum results: Abrasive flow rate, Air pressure, Nozzle angle, Stand off distance, Dwell time, Air/Media mixture and Media hardness.
Type
I
II
III
X
V
VI
L
Air Pressure
psi
kpa

50
344

25
172

25
172

30
206

25
172

25
172

25
172
Media Flow
lb/hr
kg/hr

180-300
82-136

180-300
82-136

200-400
91-182

100-400
45-181

180-300
82-136

180-300
82-136

180-300
82-136
Breakdown Rate
approx %
9

8

11

12

6

11

6

Note: All above figures are indicative for comparative purposes only.
 
Abrasive Properties
Type
I
II
III
X
V
VI
L
A
Color
Blue
Yellow
Mixed
Mixed
Grey
Grey
Grey
Mixed
Hardness (Moh)
3.0
3.5
4.0
3.2
3.5
3.0
3.5
4.0
Bulk Density (kg/m3)
642-802
930-962
930-962
642-802
642-802
642-802
642-802
642-802
Particle S.G.
1.15-1.25
1.47-1.52
1.47-1.52
1.1-1.2
1.1-1.2
1.28-1.33
1.1-1.2
1.47-1.52
Material
Polyester
Urea
Formaldehyde
Melamine
Formaldehyde
Themoset
Acrylic
Acrylic
Poly
Carbonate
Acrylic
Melamine
Formaldehyde
Size Standard
AS™ and MIL-P-85891A
 
Available Sizes
Grade
8 / 16
12 / 20
16 / 20
16 / 30
20 / 30
20 / 40
Microns
1180-2360
850-1700
850-1180
600-1180
600-850
425-850
Inch(.001”)
0.046-0.092
0.033-0.067
0.033-0.046
0.023-0.046
0.023-0.033
0.016-0.033
Grade
30 / 40
40 / 60
60 / 80
60 / 100
70 / 100
100 / 270
Microns
425-600
250-425
180-250
150-250
150-212
53-150
Inch(.001”)
0.016-0.023
0.009-0.016
0.007-0.009
0.006-0.009
0.006-0.008
0.002-0.006
Other sizes available upon request
 
Packaging
25kg Bags 110-125kg Fibre Drum
 
ORDERING INFORMATION
Stock Code
ALB-XYY-ZZW
Key
X - Product type ( I, II, III, V, VI, X, L, A)
YY - Upper mesh size (e.g. 16 for mesh 16/20)
ZZ - Lower mesh size (e.g. 20 for mesh 16/20)
W - Product grade
C for Commercial Grade
E for Electronic Grade
P for Special P Grade
W for W/O Antistatic
 
 
Untitled Document