Untitled Document
Untitled Document
Untitled Document
BLAST POTS
BLAST CABINETS &
CLOSED CIRCUIT BLASTERS
ABRASIVE RECOVERY &
RECYCLING SYSTEMS
ABRASIVES
BLAST WHEEL
REPLACEMENT PARTS
AIR BLAST ACCESSORIES &
REPLACEMENT PARTS
NEW ARRIVAL
 
HOME > BLAST PORT

Vertical Strip De-Scaler

LIST

The Panblast™ Vertical Strip Descaler cleans steel strip from 50mm wide up to 500mm wide in the vertical plane, at line speeds of up to 75m per minute. The machine is designed to be placed in the production line, and descale the strip straight from the mill in a continuous operation.
The standard design features up to 12 blastwheels, each of 75kw capacity, evenly dispersed over both sides of the machine. Each wheel is mounted on individual sliding baseplates which are moved hydraulically up and down, to set the blast pattern to suit the width of strip being descaled.
The system also features the PanBlast™ modulating abrasive flow control valve, the operation of which is linked to the line speed of the production line. This systemautomatically increases or decreases the abrasive flow in relation to the speed of the strip, to prevent overblasting at slower speeds or underblasting at higher speeds.
An electro/pneumatically controlled abrasive metering gate in the airwash separators also ensure that the separation system operates at maximum efficiency at all times.
 
Design Features :
  • Up To 12 x 75kw Blastwheels
  • Hydraulic Setting Of Blast Stream
  • Fully Automatic Operation
  • Modulating Abrasive Control Valves
  • Suitable For Use With Any Grade Of Steel Shot
  • Requires No Special Pits Or Foundations
  •  
     
    Untitled Document