Untitled Document
Untitled Document
Untitled Document
BLAST POTS
BLAST CABINETS &
CLOSED CIRCUIT BLASTERS
ABRASIVE RECOVERY &
RECYCLING SYSTEMS
ABRASIVES
BLAST WHEEL
REPLACEMENT PARTS
AIR BLAST ACCESSORIES &
REPLACEMENT PARTS
NEW ARRIVAL
 
HOME > BLAST PORT

4 Wheel Plate and Section De-Scaler

LIST

PanBlast™ 4 Wheel Plate and Section De-Scalers have the capacity to process a wide range of types and sizes of steel and rolled or fabricated steel sections.
Four (4) PanBlast™ Speedlock blast wheels are featured on the system,
and these can be supplied with either direct drive or vee belt drive arrangements.
The standard machine can descale plate up to 1500mm wide, and rolled sections up to 760UB in one pass, and the system may also be designed for larger sections and plate if required.
Conveyor speeds of up to 2 linear metres per minute or higher are achievable, depending on each particular application.
An efficient rotary brush/blow off system is used to remove residual abrasive from the product.
The cabinet blast zone is only 600mm wide, overcoming the need for cast rollers within the blast zone, and the system can be supplied with or without external roller conveyors.
Pan Abrasives can design a combination plate and section machine for alomost any application.
Contact your local Pan Abrasives representative for further information.
 
 
Technical Specification
Work Envelope In One Pass 600mm high x 1500mm wide
Blast Wheel Configurations 4 off - 7.5kW, 11kW, or 15kW
Pass Height Without Pit (A) 1300mm*
Overall Length (B) 3400mm*
Overall Width (C) 4200mm*
Overall Height (D) 6000mm*
 
Standard Options
Abrasive Removal Systems Rotary Brush/Blow Off
Automatic Abrasive Replenishment Ensures System Is Always Full Of Abrasive
External Work Roller Conveyors Designed To Suit Workpiece Requirements.
Abrasive Spill Hoppers Trap Abrasive Removed From Product And Return It To System.
*Actual dimensions will vary depending on machine configuration
 
 
Untitled Document